www.phocos.com 46 | P a g e
Solar provid es power to the AC output and charges
battery at the same time, no AC source available
Power to AC output from battery only
No battery connected and no AC source, power to AC
output from solar only
9.0 Fault Reference Codes
Fault Code Fault Event Screen View
01 Fan is locked while inverter is off
02 Over-temperature
03 Battery voltage is too high
04 Battery voltage is too low
05 AC output is short circuited
06 AC output voltage is too high
07 AC output overload timeout
08 Internal DC bus voltage is too high
09 Internal DC bus soft start failed
10 Solar charg e controller ove r-current
11 Solar charg e controller ove r-voltage
12 DC-DC conver ter over-c urrent
13 Battery disc harge over-current
51 Inverter over-current
52 Internal DC bus voltage is too low
To Next Page
Loading...
Need help?
General
