Phocos Any-Grid Series - Device Operation Settings Configuration

www.phocos.com 25 | P a g e
Load Information
Indicates overload
Indicates load levelby 0 ~ 24%, 25 ~ 49%, 50 ~ 74% and 75 ~ 100%
(left to right) increments.
Mode Operation Information
Constantly on: AC source valid
Blinking: AC source present but rejected
Constantly on: PV input valid
Blinking: PV voltage detected, butnot within allowed range
Load supplied by AC input
AC source charger circuit is ac tive
PV c harger circuit is active
DC to AC inverter circuit is active
Alar m disabled
BLE is ready to conne ct
USB disk connect ed
Timer se tting or time display
8.4 Device Operation Settings
General Settings
Press for 3 seconds to enter settings mode. Press or to select between settings menus. Once selected,
press to confirm the s election or to exit without confirmation.
Settings menus
Menu no. Description Selectable Option and Notes
00 Exit setting mode
Escape