Phonak Roger Select iN User Manual

20 21
Using the lanyard
1) Attach the lanyard to your Roger
microphone. Make sure the lanyard
clicks into the small slots on the
side of your Roger microphone.
2) Hang the lanyard around the neck
of the talker and adjust the length
so that your Roger microphone is
within 20 cm/8 inches of the
mouth.
Microphone mode indicator lights
When Roger Select iN is worn by a
talker, the top microphone mode
indicator light will light up.
Removing the clip or lanyard
Press one side of the clip or lanyard to
detach it from your Roger microphone.
5. Listening to TV or other audio
devices
5.1 Setting up the docking station
1) Insert the smaller end of the USB cable into the socket
of the docking station.
2) Insert the larger end of the USB cable in the external
power supply.
3) Plug the external power supply into the wall outlet.

Phonak Roger Select iN Specifications

General

Brand	Phonak
Model	Roger Select iN
Category	Microphone
Language	English