Phottix Laso - Page 25

25
INSTRUCTION MANUAL
En
4.1 Scanning while “AUTO” is set:
Press function button 4 to display
,
and then function button 3 corresponding
to . The channel is reset to one
with a good reception signal.
4.2 Scanning while Ch.1 to 15 is set:
Press function button 4 to display
,
and then function button 3 corresponding
to . The radio reception status is
displayed in a graph. The higher the peak
of the channel in the graph, the better the
radio reception signal.
Turn<
>to select from Ch.1 to 15, and