Possible Cause Operation
Excessive steering clearance Check the tightening of the top ring nut. If irregularities continue
in turning the steering even after making the above adjust-
ments, check the seats in which the ball bearings rotate: re-
place if they are recessed.
Noisy suspension If the front suspension is noisy, check: that the front shock ab-
sorber works properly and the ball bearings are good condition.
In conclusion, check the tightening torque of the wheel hub, the
brake calliper, the shock absorber disk in the attachment to the
hub and the steering tube.
Check that the swinging arm connecting the engine to the
chassis and the rear shock absorber work properly
Oil leakage from suspension Replace the shock absorber
MSS ZIP 100 4T Troubleshooting
TROUBL - 45
To Next Page
Loading...
