EU Declaration of Conformity
in accordance with Directive 2006/42/EC of the European Parliament and of the Council (Government Regulation No. 176/2008 Coll.)
in accordance with Directive 2014/30/EU of the European Parliament and of the Council (Government Regulation No. 117/2016 Coll.)
Manufacturer: Pilous-pásové pily, spol. s r.o., Železná 9, Brno 619 00, CZ, VAT: CZ60727551
person authorized to act on our behalf
Ing. Petr Mašek
Managing Director
In Brno, on: 1.10. 2019
Identification data of the machine: Band saw including accessories
Type: ARG
Serial number:
Description and designation of product function: The band saw is intended for cutting primarily metal materials,
while the workpiece is clamped in a fixed vice and the cutting is carried out by a saw blade arm.
All applicable provisions the machine is in compliance with:
• Directive 2006/42/EC of the European Parliament and of the Council
• Directive 2014/30/EU of the European Parliament and of the Council
Applied harmonized standards:
Responsible for drawing up technical documentation:
name, company address: Pilous-pásové pily, spol. s r.o., Železná 9, Brno 619 00, CZ, VAT: CZ60727551
The last two digits of the year in which the CE mark was placed on the product: 19
The EU Declaration of Conformity is issued to the sole responsibility of the producer.
• ČSN EN ISO 16093:2018
• ČSN EN 50370 - 1:2005
• ČSN EN 50370 - 2:2003
• ČSN EN 614-1+A1:2009
This EU Declaration of Conformity is original EU Declaration of Conformity.
To Previous Page
Loading...
