Pilz PNOZ m B0 Operating Manua

Safety
Operating Manual PNOZ m B0
1002660-EN-02
11
Warranty and liability
All claims to warranty and liability will be rendered invalid if:
} The product was used contrary to the purpose for which it is intended
} Damage can be attributed to not having followed the guidelines in the manual
} Operating personnel are not suitably qualified
} Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
Disposal
} In safety-related applications, please comply with the mission time t
M
in the safety-relat-
ed characteristic data.
} When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
For your safety
The unit meets all the necessary conditions for safe operation. However, you should always
ensure that the following safety requirements are met:
} Adequate protection must be provided for all inductive consumers.
} Do not open the housing or make any unauthorised modifications.
} Please make sure you shut down the supply voltage when performing maintenance
work (e.g. exchanging contactors).
3.3.2
3.3.3
3.3.4

Pilz PNOZ m B0 Specifications

General

Brand	Pilz
Model	PNOZ m B0
Category	Controller
Language	English