Pilz PNOZ m B0 - Operation; LED indicators

Operation
Operating Manual PNOZ m B0
1002660-EN-02
25
Display Example Description
ERROR STACK
Error stack entries






Line 1: Consecutive number
Line 2: Error class (EC) and
error information (EI)
Line 3: Error number (EN)
and error parameter (PA)
Line 4: Continuation of error
parameter (PA)
IP ADDRESS
IP address of base unit
(only appears on base units
to which a communication
module with Ethernet
interface is connected)



Line 2 and 3: IP address
INTERFACE
Interface
(only appears on base units
to which a communication
module is connected)


Show selected interface /
on expandable base units:
Select interface
STOP Device?
Stop device

Bring device to a STOP
condition
RESET PROJECT?
Delete project


Delete project from the base
unit's memory
EXIT MENU?
Exit menu

Exit menu
You can switch between the menu levels by pressing or rotating the knob.
Rotary knob
Function
The menu settings are made on the unit's display via a rotary knob. You have the option to
make the settings on the knob by hand or with a screwdriver. If you make the settings with
a screwdriver, the knob can remain within the unit.
7.2.1
7.2.1.1