Pilz PNOZ ms2p HTL - Technical Details; Electrical and Input Specifications

Technical details
Operating Manual PNOZ ms2p HTL
1001401-EN-04
29
8 Technical details
General
Approvals
BG, CCC, CE, EAC (Eurasian), KOSHA, TÜV, cU-
Lus Listed
Electrical data
Supply voltage
for Module supply
internal Via base unit
Voltage 5,0 V
Kind DC
Voltage tolerance -2 %/+2 %
Power consumption 1,0 W
Status indicator LED
Proximity switch input
Number of inputs 4
Input signal level
Signal level at "1" 11 - 30 V
Signal level at "0" -3 - 5 V
Input resistance 3 kOhm
Input's frequency range 0 - 3 kHz
Configurable monitoring frequency
Without hysteresis 0.1 Hz - 3 kHz
With hysteresis 0.2 Hz - 3 kHz
Incremental encoder input
Number of inputs 2
Connection type RJ45 female connector, 8-pin
Input signal level 12,0 - 30,0 Vss
Phase position for the differential signals A, /A and
B,/B
90° ±30°
Overload protection -30 - 30 V
Input resistance 10,0 kOhm
Input's frequency range 0 - 200 kHz
Configurable monitoring frequency
Without hysteresis 0.1 Hz - 200 kHz
With hysteresis 0.2 Hz - 200 kHz
Times
Configurable switch-off delay 0 - 2.500 ms
Supply interruption before de-energisation 20 ms
Reaction time
f>100 Hz: Configurable switch-off delay + switch-
off delay of base unit 10 ms
f<100 Hz: Configurable switch-off delay + switch-
off delay of base unit
10 ms + 1/f