PNOZ XV3.1P
Operating Manual PNOZ XV3.1P
20516-EN-09
| 40
Conventional thermal current
while loading several contacts
787532 787538
Ith per contact at UB AC;
AC1:240V,DC1:24V
Conv. therm. current with 1 con-
tact 8 A 8 A
Conv. therm. current with 2 con-
tacts 7,8 A 7,8 A
Conv. therm. current with 3 con-
tacts 6,5 A 6,5 A
Conv. therm. current with 4 con-
tacts 5,5 A 5,5 A
Conv. therm. current with 5 con-
tacts 5 A 5 A
Ith per contact at UB DC;
AC1:240V,DC1:24V
Conv. therm. current with 1 con-
tact 8 A 8 A
Conv. therm. current with 2 con-
tacts 7,8 A 7,8 A
Conv. therm. current with 3 con-
tacts 6,5 A 6,5 A
Conv. therm. current with 4 con-
tacts 5,5 A 5,5 A
Conv. therm. current with 5 con-
tacts 5 A 5 A
Times 787532 787538
Switch-on delay
With automatic start typ. 400 ms 400 ms
With automatic start max. 550 ms 550 ms
With automatic start after power
on typ. 750 ms 750 ms
With automatic start after power
on max. 1.050 ms 1.050 ms
With monitored start typ. 35 ms 35 ms
With monitored start max. 60 ms 60 ms
Delay-on de-energisation
With E-STOP typ. 15 ms 15 ms
With E-STOP max. 30 ms 30 ms
With power failure typ. UB 240 V 900 ms 900 ms
With power failure max. UB 240
V 1400 ms 1400 ms
With power failure typ. UB 24 V 120 ms 120 ms
With power failure max. UB 24 V 170 ms 170 ms
Recovery time at max. switching
frequency 1/s
After E-STOP 50 ms +tv 50 ms +tv
After power failure on wide-
range power supply 1450 ms 1450 ms