EasyManua.ls Logo

Pilz PNOZmulti 2 - Section 3 Safety; 3.1 Intended use; 3.2 Safety regulations

Pilz PNOZmulti 2
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
OperatingManualCommunicationinterfaces
1002971EN03
11
3 Safety
3.1 Intendeduse
ThecommunicationinterfaceontheconfigurablecontrolsystemPNOZmulti2isusedto
transferdiagnosticdatatoanapplicationprogram.Thisdatamayonlybeusedfornon
safetypurposes,e.g.visualisation.
NOTICE
Fordetailsoftheintendeduseandapplicationoftheconfigurablecontrol
systemPNOZmulti2pleaserefertotheoperatinginstructionsforthere
spectiveunit.
Thefollowingisdeemedimproperuseinparticular:
} Anycomponent,technicalorelectricalmodificationtotheproduct
} Useoftheproductoutsidetheareasdescribedinthismanual
} Useoftheproductoutsidethetechnicaldetails(seechapterentitled"TechnicalDe
tails").
3.2 Safetyregulations
3.2.1 Useofqualifiedpersonnel
Theproductsmayonlybeassembled,installed,programmed,commissioned,operated,
maintainedanddecommissionedbycompetentpersons.
Acompetentpersonissomeonewho,becauseoftheirtraining,experienceandcurrentpro
fessionalactivity,hasthespecialistknowledgerequiredtotest,assessandoperatethe
workequipment,devices,systems,plantandmachineryinaccordancewiththegeneral
standardsandguidelinesforsafetytechnology.
Itisthecompany’sresponsibilityonlytoemploypersonnelwho:
} Arefamiliarwiththebasicregulationsconcerninghealthandsafety/accidentpreven
tion
} Havereadandunderstoodtheinformationprovidedinthisdescriptionunder"Safety"
} Andhaveagoodknowledgeofthegenericandspecialiststandardsapplicabletothe
specificapplication.
3.2.2 Warrantyandliability
Allclaimstowarrantyandliabilitywillberenderedinvalidif
} Theproductwasusedcontrarytothepurposeforwhichitisintended
} Damagecanbeattributedtonothavingfollowedtheguidelinesinthemanual
} Operatingpersonnelarenotsuitablyqualified
} Anytypeofmodificationhasbeenmade(e.g.exchangingcomponentsonthePCB
boards,solderingworketc.).

Table of Contents

Related product manuals