Pilz PNOZmulti User Manual

Contents
Installation Manual PNOZmulti Installation Manual
1002265-EN-02
4
5.8 Analogue input module 26
5.9 Motion monitoring modules 27
5.10 Connection example: analogue input module and speed monitor 29
5.11 Fieldbus modules 31
5.12 Link modules 31
5.13 Cascading 32
5.13.1 System requirements 33
5.13.2 Series connection 33
5.13.3 Tree structure 34
5.13.4 Supply voltage for the cascaded units 35
5.13.5 Installing the cascaded units 35
5.13.6 Wiring 36

Pilz PNOZmulti Specifications

General

PL	PL e
Expansion Modules	Yes, via base units and extension modules
Programming	PNOZmulti Configurator (graphical configuration software)
Safety standards	EN ISO 13849-1, EN 62061, IEC 61508
SIL	SIL 3
Operating voltage	24V DC (typically, but can vary depending on the specific module)
Safety category	Category 4