Pilz PSEN ml b 1.1 - Mechanical data

Technical details
Operating Manual PSEN ml b 1.1/2.1/2.2
1003884-EN-12
| 67
Environmental data 570404 570402 570400
Storage temperature
In accordance with the
standard EN 60068-2-1/-2 EN 60068-2-1/-2 EN 60068-2-1/-2
Temperature range -25 - 70 °C -25 - 70 °C -25 - 70 °C
Climatic suitability
In accordance with the
standard EN 60068-2-78 EN 60068-2-78 EN 60068-2-78
Humidity 93 % r. h. at 40 °C 93 % r. h. at 40 °C 93 % r. h. at 40 °C
EMC EN 55011: class A, EN
60947-5-3, EN 61326-3-1
EN 55011: class A, EN
60947-5-3, EN 61326-3-1
EN 55011: class A, EN
60947-5-3, EN 61326-3-1
Vibration
In accordance with the
standard EN 60068-2-6 EN 60068-2-6 EN 60068-2-6
Frequency 10 - 55 Hz 10 - 55 Hz 10 - 55 Hz
Amplitude 1 mm 1 mm 1 mm
Shock stress
In accordance with the
standard EN 60068-2-27 EN 60068-2-27 EN 60068-2-27
Number of shocks 3 3 3
Acceleration 30g 30g 30g
Duration 11 ms 11 ms 11 ms
Airgap creepage
Overvoltage category III III III
Pollution degree 3 3 3
Rated insulation voltage 75 V 75 V 75 V
Rated impulse withstand
voltage 0,8 kV 0,8 kV 0,8 kV
Protection type
Housing IP67 IP67 IP67
In accordance with UL type 1 type 1 type 1
Mechanical data 570404 570402 570400
Length of cable with con-
nector 230 mm 230 mm 230 mm
Min. bending radius (fixed
permanently) K1 5 x Ø 5 x Ø 5 x Ø
Min. bending radius (mov-
ing) K1 10 x Ø 10 x Ø 10 x Ø
Cable diameter K1 6,2 mm 6,2 mm 6,2 mm
Escape release available No No No
Mechanical life 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles
Mechanical life with cen-
tering ring 50,000 cycles 50,000 cycles 50,000 cycles
Holding force FZh
Fixing screws in paral-
lel to actuator 7.500 N 7.500 N 7.500 N
Fixing screws side-on
to actuator 5.000 N 5.000 N 5.000 N