Pilz PSEN ml b 1.1 - Page 68

Technical details
Operating Manual PSEN ml b 1.1/2.1/2.2
1003884-EN-12
| 68
Mechanical data 570404 570402 570400
Holding force F1Max in
accordance with ISO
14119
Fixing screws in paral-
lel to actuator 15.000 N 15.000 N 15.000 N
Fixing screws side-on
to actuator 10.000 N 10.000 N 10.000 N
Latching force 30 N 30 N 30 N
Max. vertical offset +/-3,0 mm +/-3,0 mm +/-3,0 mm
Max. lateral offset +/-3,0 mm +/-3,0 mm +/-3,0 mm
Max. angular offset
around the X axis +/-2,0 deg +/-2,0 deg +/-2,0 deg
Max. angular offset
around the Y axis +/-2,5 deg +/-2,5 deg +/-2,5 deg
Max. angular offset
around the Z axis +/-7,5 deg +/-7,5 deg +/-7,5 deg
Max. offset in closing dir-
ection +/-2 mm +/-2 mm +/-2 mm
Max. retract speed of ac-
tuator 0,3 m/s 0,3 m/s 0,3 m/s
Actuator 1 PSEN ml 2.1 PSEN ml 2.1 PSEN ml 1.1
Min. distance between
safety switches 0 mm 0 mm 0 mm
Connection type M12, 8-pin male con-
nector
M12, 8-pin male con-
nector
M12, 8-pin male con-
nector
Cable LiYY 8 x 0.25 mm2 LiYY 8 x 0.25 mm2 LiYY 8 x 0.25 mm2
Material Aluminium, stainless
steel, plastic, galvanised
steel, Zn
Aluminium, stainless
steel, plastic, galvanised
steel, Zn
Aluminium, stainless
steel, plastic, galvanised
steel, Zn
Max. torque setting for fix-
ing screws 6 - 6,5 Nm 6 - 6,5 Nm 6 - 6,5 Nm
Max. torque setting es-
cape release 1,2 - 1,5 Nm 1,2 - 1,5 Nm 1,2 - 1,5 Nm
Max. torque setting for
mounting plate 22 - 24 Nm 22 - 24 Nm 22 - 24 Nm
Max. torque setting for
mounting bracket 14 - 16 Nm 14 - 16 Nm 14 - 16 Nm
Min. gate radius 300 mm 300 mm 300 mm
Dimensions
Height 217,2 mm 217,2 mm 217,2 mm
Width 40 mm 40 mm 40 mm
Depth 40 mm 40 mm 40 mm
Actuator dimensions
Height 63,5 mm 63,5 mm 63,5 mm
Width 40 mm 40 mm 40 mm
Depth 67,2 mm 67,2 mm 67,2 mm
Weight of safety switch 950 g 950 g 950 g
Weight of actuator 145 g 145 g 145 g