Pima FORCE Installation Guide

Chap. 6: Zones
29
Parameter
Description
Partition Allocation
Select the zone’s partitions. The selected numbers will stay on and
not flash.
Soak Test Mode
Select to put the zone in test mode for up to one week. See Chap. 10,
on page 39 for details.
6.2 Zone Types Settings
System Configuration  Zones  Zone Types Settings
Zone Type
Attributes
 Burglary, Panic,
Silent Panic, Fire,
Duress, Medical,
Anti-Mask, Shock
Sensor, Key Switch
Modes, Custom Zone
Types
1)  Sensitivity: set the zone sensitivity in milliseconds. Range:
1-3000, default: 800.
Sensitivity is the time period between opening the zone (relay),
and triggering the alarm. Closing the relay for one second resets
the zone.
2)  Attributes: see below.
3)  Audible Notification: select from the list:
 Alarm tone: when calling the contacts, hi-lo alarm will be
sounded.
Key Switch Types
 Key Switch in Away/Home 1-4: select the key type and set its
sensitivity (see above).
Custom Zone Types
4) Custom Zone Type 1-5: see the other zone types above, and in
addition:
1) Trigger & Report: select a standard zone type (Burglary,
Panic, Etc.) to be used for reporting the CMS and triggering
outputs, or Custom Type . If you select Custom Type you
can use it to trigger outputs to activate/deactivate special
devices such as pumps and heaters).
2) Name: user text, up to 16 characters.
6.2.1 Attributes
System Configuration  Zones  Zone Types Settings  Attributes
The zone type attributes are listed in the table below:
Attribute
When selected...
 Trigger Sirens
The External and Internal Siren programmed output types will be
triggered in alarm, and activate the sirens (by default. See Section 7.1, on
page 31 for a warning).
 Ext. Siren at
Disarm
The External Siren programmed output type will be triggered in alarm,
and activate the external siren, even while the FORCE is at disarm.
 Reports at
Disarm
Reports to the CMS will be sent, even while the FORCE is at disarm.
 Auto-bypass
If this zone triggers the alarm 3 times while the system is armed, the
zone is automatically bypassed (a Zone Bypass report is generated) until
the system/partition is disarmed, or until the Auto-bypass Limit time
elapses. See Chap. 10, on page 39.
 Different Siren
Tone
A different tone will be sounded when this zone triggers the alarm

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English