Pima FORCE - Appendix D Menu Map; Menu Navigation Flowchart

Force Security System - Installation Guide
32
Parameter
Details
 Partitions
Set the physical output’s allocation to partition/s - press the desired
partition/s. The selected partitions will stay on and not flash.
Press # or * to scroll between partitions.
 Name
User text, up to 16 characters.
7.2 Zone Expanders
System Configuration  Outputs  Zone Expanders
The ZEX508/516 zone expander’s parameters are the same as those of the onboard
outputs, above.
Press # or * to scroll between expanders.
7.3 Output Expander
System Configuration  Outputs  Output Expander
The OEX508 output expander’s parameters are the same as those of the onboard outputs, above.
Press # or * to scroll between expanders.
 Relay No.1-8: press the desired relay and set its parameters.