Pima FORCE - Arm Prevention - Faults

Chap. 11: General Settings
43
11.1 Arm Prevention - Faults
System Configuration  General Settings  Arm Prevention - Faults
You can prevent the users from arming the alarm system if some faults exist
11
. Without fixing
these faults the system cannot be armed.
 The user will be allowed to override the selected faults in this menu.
The faults are: AC Loss, Low Battery, Tamper, Any Expander, Telephone Line, GSM module,
and Network.
11
In the user’s menu System Options/Fault Override-Arm (user permission required)