MACHINE PREPARATION
1. INTENDED USE
The scrubbing machine is designed exclusively for the professional cleaning of
surfaces and floors in industrial, commercial and public environments. In
addition, only use the machine in closed (or at least covered) places.
2. HANDLING THE PACKED MACHINE
The machine is contained in specific packaging.
It is not possible to place more than two packages on top of each other.
The overall dimensions of the package are:
PE340AS
A 1152
B 764
C 1684
A
C
B
3. HOW TO UNPACK THE MACHINE
1. Remove the outer packaging.
2. Release the parking brake by removing the blocking pin (1).
3. The machine is fixed to the pallet with wedges which block the wheels.
4. Remove these wedges.
4. Use a chute to get the machine down from the pallet, pushing it backwards. Do
not assemble the rear squeegee before unloading the machine, and avoid
violently jolting the brush base. To assemble the squeegee, read the
“ASSEMBLING THE SQUEEGEE” paragraph.
5. Keep the pallet for any future transport needs.
ATTENTION: if the product is delivered in cardboard containers,
handle the packed product with suitable lifting means that comply
with the legal requirements.
1
To Next Page
Loading...
