100
Chapter 7
AV
Using the AV Source
(Pioneer AV Equipment)
Hands-free Phoning
Hands-free phoning with cellu-
lar phones featuring Bluetooth
technology
Connected with registered phone screen
shown
If you use a Bluetooth adapter (e.g. CD-BTB200),
you can connect a cellular phone featuring Blue-
tooth wireless technology to this unit for hands-
free, wireless calls, even while driving. For details
concerning operation, refer to the Bluetooth
adapter’s operation manual. This section pro-
vides brief information on the hands-free phoning
operations with this unit that slightly differs or is
cut short from the operations described in the
Bluetooth adapter’s operation manual.
❒ Since this unit is always on standby to con-
nect with your cellular phones via Bluetooth
wireless technology, using this unit without
running the engine can result in battery drain-
age.
(1) Source icon
(2) Device name indicator
(3) Signal level indicator
❒ If the signal is not available, ( ) is dis-
played.
❒ Depending on the cellular phones featuring
Bluetooth technology, this indicator may not
show on the screen.
(4) Battery strength indicator
❒ Battery strength indicator may differ from the
actual battery strength.
❒ Depending on the cellular phones featuring
Bluetooth technology, this indicator may not
show on the screen.
(5) Missed call notice indicator
(6) Preset list display
❒ This navigation system’s phone call reception
is always on standby when the ignition switch
is set to ACC or ON.
❒ The line-of-sight distance between this naviga-
tion system and your cellular phone must be
10 meters or less when sending and receiving
voice and data via Bluetooth technology. How-
ever, the transmission distance may become
shorter than the estimated distance, depend-
ing on the environment in use.
❒ When BT-TEL is selected as a source, equal-
izer curves are automatically changed to suit-
able settings for the phone source. When the
source is changed or returned to another
source, equalizer settings automatically
return to the original settings.
❒ When BT-TEL is selected as a source, func-
tions other than FAD/BAL are inoperable in
the Sound menu.
About the telephone source
standby mode
Once connected via Bluetooth wireless technol-
ogy, this navigation system will remain on tele-
phone source standby in the background while
the connection is sustained. This means you can
freely use the other functions of this system but
still be ready to receive a call.
Setting up for hands-free phon-
ing
Before you can use the hands-free phoning func-
tion you will need to set up the navigation system
for use with your cellular phone. This entails
establishing a Bluetooth wireless connection
between the system and your phone, registering
your phone with the system and adjusting the vol-
ume level.
1 Connection
Your phone should already be temporarily
connected. However, to make best use of the
functions, we recommend you register the
phone to the navigation system.
➲ “Connecting a cellular phone” ➞ Page 104
(1)
(6)
(2)
(3) (4)
(5)
BT-TEL
CRB2325A_U_English.book Page 100 Wednesday, December 13, 2006 6:58 PM
To Next Page
Loading...
