113
Chapter 7AV
Using the AV Source
(Pioneer AV Equipment)
❒ Information about songs (e.g. the elapsed
playing time, song title, song index, etc.) can-
not be displayed on this navigation system.
❒ While you are listening to songs on your Blue-
tooth audio player, please refrain from operat-
ing your cellular phone as much as possible.
If you try operating on your cellular phone, the
signal from your cellular phone may cause a
noise on the song playback.
❒ When you are talking on the cellular phone
connected to this navigation system via Blue-
tooth wireless technology, the song playback
from your Bluetooth audio player connected
to this navigation system is muted.
❒ Even if you switch to another source while lis-
tening to a song on your Bluetooth audio
player, the playback of song continues to
elapse.
❒ Depending on the Bluetooth audio player you
connected to this navigation system, opera-
tions on this navigation system to control the
player may differ from those explained in this
manual.
(1) Source icon
(2) Device name
Touching “Name” switches between equip-
ment name and BD address.
1 Touch “BT-AUDIO” in the AV Source
screen to select the Bluetooth audio
source.
➲ “Selecting an AV source” ➞ Page 29
❒ For this navigation system to control your
Bluetooth audio player it needs to estab-
lish a Bluetooth wireless connection.
(Refer to “Connecting a Bluetooth audio
player” on page 113.)
2 Touch .
Playback starts.
3 To skip back or forward to another track,
touch or .
Touching skips to the start of the next
track. Touching once skips to the start of
the current track. Touching it again will skip to
the previous track.
4 To perform fast forward or reverse, keep
touching or .
5 To stop playback, touch .
Pausing track playback
Pause lets you temporarily stop track playback.
1 Touch .
Play of the current track pauses.
❒ To resume playback at the same point that
you turned pause on, touch again.
Advanced BT-Audio operation
(1) Function display
➲ How to display the Function menu ➞
Page 77
Connecting a Bluetooth audio
player
1 Touch “Connection Open” in the Function
menu to turn the connection open on.
Pairing is displayed. This navigation system
is now on standby for connection from Blue-
tooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, the connec-
tion to this navigation system will be automat-
ically established.
❒ Before you can use audio players you may
need to enter the PIN code into this naviga-
tion system. If your player requires a PIN
code to establish a connection, look for the
code on the player or in its accompanying
documentation. Enter the PIN code refer-
ring to page 105.
(1)
BT-AUDIO
CRB2325A_U_English.book Page 113 Wednesday, December 13, 2006 6:58 PM
To Next Page
Loading...
