Pioneer AVIC-D3 - Navigation System With DVD Player - XM Tuner; Listening to XM Satellite Radio

91
Chapter 7AV
Using the AV Source (Pioneer AV Equipment)
3 When you find the desired track (or disc)
touch “Scan” to turn scan play off.
❒ After track or disc scanning is finished,
normal playback of the tracks will begin
again.
XM Tuner
Listening to XM Satellite Radio
ALL CH mode
CATEGORY mode
You can use the navigation system to control an
XM satellite digital tuner (e.g. GEX-P10XMT),
which is sold separately.
For details concerning operation, refer to the XM
tuner’s operation manuals. This section provides
information on XM operations with navigation
system which differs from that described in the
XM tuner’s operation manual.
Only the logo data that is contained in the naviga-
tion DVD Map Disc can be displayed for each
channel. The icon of a newly established channel
that is not contained in the disc cannot be dis-
played. When no icon can be displayed, the fol-
lowing substitute icon is displayed.
Substitute icon
❒ The logo data is not displayed during the
memory navi mode.
❒ The following functions are not available on
the GEX-P10XMT, GEX-P920XM.
— Switching the XM display
❒ The following functions are not available on
the GEX-P910XM.
— Using the MyMix function
— Using the direct traffic announcement
function
— Selecting a channel from the XM channel
list display
❒ The following functions are not available on
the GEX-P900XM.
— Using the MyMix function
— Using the direct traffic announcement
function
— Selecting a channel from the XM channel
list display
— Selecting an XM channel directly
(1) Source icon
(2) XM band indicator
(3) XM preset number indicator
(4) XM channel number indicator
(5) XM channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all chan-
nels in ALL CH (or CH NUMBER) mode, and
select a channel from a selected category in
CATEGORY mode.
➲ “Switching the XM channel select mode” ➞
Page 92
(6) XM channel category or XM channel
information
(7) Detailed information or preset list display
(8) Category icon
➲ “Switching between the detailed information
display and the preset list display” ➞ Page 92
1 Touch “XM” in the AV Source screen to
select the XM.
➲ “Selecting an AV source” ➞ Page 29
2 Touch “Band” to select an XM band.
Touch “Band” repeatedly until the desired XM
band is displayed: XM1, XM2 or XM3.
(2)(1) (4)(5)
(3)
(6)
(7)
(8)
XM
CRB2325A_U_English.book Page 91 Wednesday, December 13, 2006 6:58 PM