Pioneer AVIC-D3 - Navigation System With DVD Player - How to Set Your Destination by Address

26
Chapter 1
Basic Operation NAVI/AV
Basic flow of operation
How to set your destination by
address
1 Press the MAP button to display the map
screen.
2 Press the MENU button to display the
NAVI MENU.
3 Touch “Destination” to display
Destination menu.
4 Touch “Address Search”.
5 Touch “Zone code key”.
If the destination is in another zone, this
changes the zone setting.
6 Touch the zone code of the destination,
then touch “OK”.
1 Park your vehicle in a safe place, and
apply the parking brake.
2 Insert the Pioneer DVD Map Disc to
the disc loading slot.
3 Press the MAP button to display the
map screen.
4 Press the MENU button to display the
NAVI MENU.
5 Touch “Destination” to display
Destination menu.
6 Select the method of searching for
your destination.
7 Enter the information about your desti-
nation.
8 Navigation system calculates the
route to your destination, and then
shows the route on the map.
9 After releasing the parking brake,
drive in accordance with the naviga-
tion guidance, subject to the important
safety instructions noted on page 12 to
14.
Zone code key
Selected zone
Zone code
CRB2325A_U_English.book Page 26 Wednesday, December 13, 2006 6:58 PM