106
Chapter 7
AV
Using the AV Source
(Pioneer AV Equipment)
Registering your cellular phone
You can register a phone that is temporarily con-
nected to the navigation system in order to take
full advantage of the features available with Blue-
tooth wireless technology. A total of five phones
can be registered: three user cellular phones and
two guest phones. When registered as a user
phone, all the possible functions are available for
use. When registered as a guest phone, some
functions are limited.
1 Touch “Phone Register” in the Function
menu.
The phone register screen appears.
(1) 1:
User phone 1
(2) 2:
User phone 2
(3) 3:
User phone 3
(4) G:
Guest phone 1
(5) G:
Guest phone 2
2 Touch and hold “1: ” — “3: ” or “G: ”.
When the registration is completed, the
device name is displayed.
Displaying BD (Bluetooth
Device) address
Each device featuring Bluetooth technology is
allocated a unique 48-bit device address. It con-
sists of a 12-digit of hexadecimal string. This navi-
gation system can display the BD address of your
registered cellular phone featuring Bluetooth
technology.
1 Touch “Phone Connect” in the Function
menu.
The phone connection menu screen appears.
2 Touch “Phone Name”.
The 12-digit hexadecimal string is displayed.
❒ Without connecting, you cannot select
“Phone Name”. Connect your cellular
phone first.
➲ “Connecting a cellular phone” ➞ Page 104
Disconnecting a cellular phone
When you are done using your phone with the
navigation system, you can close the Bluetooth
wireless connection.
1 Touch “Phone Connect” in the Function
menu.
The phone connection menu screen appears.
2 Touch “Disconnect”.
After the disconnection is completed, No
Connection is displayed.
Deleting a registered phone
If you no longer need to use a registered phone
with the navigation system, you can delete it from
the registration assignment to free it for another
phone.
❒ If a registered phone is deleted, all the phone
book entries and call history lists correspond
to the phone will be also cleared.
1 Touch “Phone Register” in the Function
menu.
The phone register screen appears.
2 Touch “Delete” on the right-hand side of
the device name of the cellular phone you
want to delete.
The deletion confirmation message appears.
3 Touch “Yes”.
The registered phone is deleted.
❒ When not deleting a registered phone,
select “No”.
Transferring the phone book
You can transfer the numbers in a registered user
phone’s address book into the phone book.
❒ If a guest phone is connected to this naviga-
tion system via Bluetooth technology, this
function cannot be selected.
(1)
(2)
(3)
(4)
(5)
BT-TEL
CRB2325A_U_English.book Page 106 Wednesday, December 13, 2006 6:58 PM
To Next Page
Loading...
