60
Chapter 4
Editing the Navigation Utilities NAVI
❒ You can turn off the use of Traffic flow infor-
mation.
➲ “Set use of Traffic flow information setting to
off” ➞ Page 60
Checking traffic flow information on the
list
The traffic flow information on the route can also
be displayed as an onscreen list.
❒ The method for checking the traffic flow infor-
mation displayed on the screen is the same
for “Checking all traffic information”.
➲ “Checking all traffic information” ➞ Page 57
1 Touch “Info/Traffic” in the NAVI MENU,
then touch “Traffic Flow”.
You can use instead of in the
traffic events list screen. The list with the traf-
fic flow information is shown.
The list will be sorted according to the average
speed by touching .
Selecting traffic information to
display
There are different types of traffic information
that can be received via the XM NavTraffic ser-
vice, and you can select which types will be incor-
porated and displayed on your navigation system.
1 Touch “Info/Traffic” in the NAVI MENU,
and then touch “Traffic Settings”.
2 Touch “Change”.
The names of the displayed traffic information
items and a list of icons appears on the
screen.
3 Touch the traffic information item to dis-
play.
A red check appears next to the selected traf-
fic information.
❒ Touching “All” selects all the traffic infor-
mation.
4 Touch “Done”.
The selected traffic information icon is added
to the screen.
❒ Touch “Back” to cancel your selection.
❒ The following types of traffic congestion
cannot be deselected and are always dis-
played: stop and go, stopped traffic, and
closed/blocked roads.
5 Touch “Back”.
Set use of Traffic flow information set-
ting to off
1 Touch “Info/Traffic” in the NAVI MENU,
and then touch “Traffic Settings”.
2 Touch “On”.
The button changes to “Off”.
3 Touch “Back”.
❒ If you wish to use the traffic flow information
again, touch “Off” to turn the button “On” in
the Traffic Settings screen.
CRB2325A_U_English.book Page 60 Wednesday, December 13, 2006 6:58 PM
To Next Page
Loading...
