132
Appendix NAVI/AV
Adjusting the Response Posi-
tions of the Touch Panels
(Touch Panel Calibration)
If you feel that the touch keys on the screen devi-
ate from the actual positions that respond to your
touch, adjust the response positions of the touch
panel. There are two adjustment methods: 4-point
adjustment, in which you touch four corners of
the screen, and 16-point adjustment, in which
you make fine-adjustments on the entire screen.
❒ Make sure to use the supplied stylus for
adjustment and gently touch the screen. If
you press the touch panel forcefully, the touch
panel may be damaged. Do not use a sharp
pointed tool such as a ballpoint pen or a
mechanical pen. Otherwise the screen is
damaged.
Stylus (supplied with navigation system)
1 Press the VOLUME knob to switch to the
Audio operation screen.
2 Press the MENU button to change to the
AV Source screen.
3 Press and hold the MENU button for two
seconds or more.
The 4-point touch panel adjustment screen
appears.
4 Touch and hold the arrows that point to
the corners of the LCD screen with the
stylus.
The red arrow indicates the order.
5 Press the MENU button.
The adjusted position data is saved.
❒ Do not turn off the engine while saving the
adjusted position data.
❒ Press the MENU button to complete the 4-
point adjustment.
❒ To cancel the adjustment, press and hold
the MENU button.
6 Press the MENU button.
The 16-point touch panel adjustment screen
appears.
7 Gently touch the center of the + mark dis-
played on the screen with the touch panel
adjustment pen.
After you touch all marks, the adjusted posi-
tion data is saved.
❒ Do not turn off the engine while saving the
adjusted position data.
❒ Press the MENU button to return to the
previous adjustment position.
8 Press and hold the MENU button.
The adjustment is complete.
❒ If touch panel adjustment cannot be per-
formed properly, consult your local Pio-
neer dealer.
CRB2325A_U_English.book Page 132 Wednesday, December 13, 2006 6:58 PM
To Next Page
Loading...
