115
Chapter 7AV
Using the AV Source
(Pioneer AV Equipment)
Operate the external unit by
using 1 KEY — 6 KEY
The external unit can be operated by transmitting
the operating commands set to 1 KEY — 6 KEY.
❒ Operation varies depending on the external
unit connected. (In some cases, the external
unit may not respond.)
1 Touch desired key (“1 KEY” — “6 KEY”)
to operate the external unit.
Operate the external unit by
using F1 — F4
The external unit can be operated by transmitting
the operating commands set to F1 — F4.
❒ The operating commands set to F1 — F4 vary
depending on the external unit.
❒ Some functions may not be used until you
touch and hold the key.
1 Touch “F1” — “F4”.
The operation command is transmitted to the
external unit.
Switching the automatic and
manual function
You can turn automatic and manual function on
or off.
You can switch between Auto and Manual func-
tions of the external unit connected.
Initially, this function is set to Auto.
❒ Operating commands set for Auto and Man-
ual operations vary depending on the external
unit connected.
1 Touch “A / M”.
Touching “A / M” switches between “Auto”
and “Manual”.
AV Input (AV)
• For safety reasons, visual images cannot
be viewed while your vehicle is in motion.
To view visual images, you must stop in a
safe place and put on the parking brake
before setting your route (see page 13
Interlock for details).
Selecting AV as the source
1 Touch “AV-1” or “AV-2” in the AV Source
screen to select AV as the source.
When the source icon is not displayed, you
can display it by touching the screen.
➲ “Selecting an AV source” ➞ Page 29
❒ If you want to switch AV source, select
“Video” in “AV1 Input” or “AV2 Input”.
➲ “Setting the video input” ➞ Page 124
AV
CRB2325A_U_English.book Page 115 Wednesday, December 13, 2006 6:58 PM
To Next Page
Loading...
