Pioneer PDP-433MXE

26
En
Display Panel Adjustments
English
Display Panel Adjustments
Adjusting the Image Position and
Clock (Automatic Adjustment)
Pressing AUTO SET UP on either the display or the
remote control unit will adjust the screen position and
clock to optimum values.
Note
Perform this adjustment individually for each input function
(INPUT 1, INPUT 2), and each signal type.
Press AUTO SET UP on either the main unit or remote
control unit.
÷ Optimum settings may not be possible for low-
luminance and certain other kinds of signals. In this
case, follow the instructions in the section “Manual
Adjustment of Screen Position and Clock” to make
more precise adjustments.
AUTO SET UP
AUTO
SET UP
Main Unit Operating Panel Remote Control Unit