Pioneer PDP-436SXE - Page 151

PDP-436SXE
151
5678
56
7
8
C
D
F
A
B
E
No. Pin Name I/O Pin Function
101 ROCK
O
Clock for digital ITU-R BT. 656/component output
102 BCLK8 I/O Line-lock clock monitor input/output
103 DVDD1 − Digital power supply (1.5V)
104 DGND − Digital ground
105 HD O Horizontal sync. signal output
106 VD
O
Vertical sync. signal output
107 VBLK OV blanking output
108 FILD
O
Field output
109 DVDD3
−
Digital power supply (3.3V)
110 RDEO
O
Effective pixel area output
111 BCKM I Test mode selection of BCLK8 pin (L: Normal, H: Test mode)
112 FDIO0 I/O Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
113 FDIO1 I/O Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
114 DGND − Digital ground
115 DVDD1 − Digital power supply (1.5V)
116 FDIO2 I/O
Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
117 FDIO3
I/O
Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
118 FDIO4
I/O
Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
119 FDIO5 I/O Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
120 DVDD3 − Digital power supply (3.3V)
121 FDIO6 I/O Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
122 FDIO7 I/O Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
123 FDIO8 I/O Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
124 FDIO9 I/O Digital 8/10 bit Cb, Cr output / Input at UPD64031A digital connection Open at no use.
125 DVDD1 − Digital power supply (1.5V)
126 DGND
−
Digital ground
127 FCKQ
I/O
Sampling clock output for digital connection
128 FOCP I/O Clamp pulse output for digital connection / Timing output for digital RGB input (VD)
129 FCSI I/O Sync sep. signal input / Timing output for RGB input (HD)
130 DFBI I Fast blanking signal input for analog RGB input
131 DYSI I YS signal input for digital RGB input
132 DVDD3
−
Digital power supply (3.3V)
133 DVDD1
−
Digital power supply (1.5V)
134 DYMI I YM signal input for digital RGB input
135 DCGI I Digital RGB/G signal input
136 DCBI I Digital RGB/B signal input
137 DCRI I Digital RGB/R signal input
138 AVDD1
−
Analog power supply (1.5V)
139 ATS1
−
Analog test input Normally, connect to GND.
140 ATS2 − Analog test input Normally, connect to GND.
141 AVDD3 − Analog power supply (3.3V)
142 ATS3
−
Analog test input Normally, connect to GND.
143 AGND
−
Analog ground
144 AGND − Analog ground
145 AGND − Analog ground
146 VCLY O ADC1 clamp voltage
147 VCOM1
−
ADC1 common-mode reference voltage
148 AVI
I
ADC1 composite/Y signal input
149 VLPFI
−
Analog test output Connect to GND via 0.1µF capacitor.
150 ASYI
I
ADC1 composite/Y signal input