Pioneer PDP-507XDA - Reducing Video Noise; Setting Child Lock; Suppressing Audio Distortion

Setting up
08
28
En
9 Select “System“ (/).
10 Select a sound system (/).
You can select from among “B/G”, “D/K”, “I”, “M/N”.
11 Select “Colour System“ (/).
12 Select a Colour system (/).
You can select from “Auto”, “PAL”, “NTSC”, “SECAM”, “PAL-M”,
“PAL-N”, and “4.43NTSC”.
13 Select “Store“ (/).
14 Select “Yes“ (/).
• With “Yes” selected, you can select the channel using P+ / P–.
With “No” selected, you cannot select the channel using
P+ / P–.
15 Press HOME MENU to exit the menu.
• Alternatively, to set up for another channel, repeat steps 5 to
14.
Note
• Manual Adjust also allows you to make selections for “Tuner
NR”, “Child Lock”, and “High Deviation”. See “Reducing video
noise”, “Setting Child Lock”, and “Suppressing audio
distortion” respectively.
• This plasma display is equipped with the auto frequency tuning
function that automatically adjusts tuning frequencies
according to received signals. For this reason, the Manual
Adjust menu may show slightly different frequencies from your
entry when you access the menu next time. You cannot
deactivate the Auto Frequency Tuning function.
Reducing video noise
For the individual channels, you can specify whether the plasma
display should reduce video noise depending on the levels of
broadcasting signals.
1 Repeat steps 1 to 6 provided for “Setting up analogue TV
channels manually“.
After selecting a programme number, perform the following
steps:
2 Select “Tuner NR“ (/).
3 Select “On“ or “Off“ (/).
4 Press HOME MENU to exit the menu.
Note
• This function may not achieve a satisfactory result, depending
on the conditions of broadcasting signals.
Setting Child Lock
Child Lock inhibits selected TV channels from being tuned and
watched.
1 Repeat steps 1 to 6 provided for “Setting up analogue TV
channels manually“.
After selecting a programme number, perform the following
steps:
2 Select “Child Lock“ (/).
3 Select “Block“ (/).
• The selection is switched between “View” and “Block”.
4 Press HOME MENU to exit the menu.
Suppressing audio distortion
You can suppress audio distortion that may be induced when too
strong audio signals are received in the selected channel.
Note
• High Deviation is selectable only when you have selected “D/K”
for “System” under “Setting up analogue TV channels
manually” (page 27).
1 Repeat steps 1 to 6 provided for “Setting up analogue TV
channels manually“.
After selecting a programme number, perform the following
steps:
Search
System
Programme Entry
Colour System
Store
44.25MHz
PAL
No
1
B/G
Search
System
Colour System
Store
Tuner NR
44.25MHz
On
Yes
B/G
PAL
System
Colour System
Store
Tuner NR
Child Lock
B/G
PAL
View
On
Yes
Colour System
Store
Tuner NR
Child Lock
PAL
View
Yes
On
High Deviation
Off
Tuner NR
Child Lock
High Deviation
Off
On
Block