Pioneer PDP-507XDA - Connecting a VCR; VCR Playback; Connecting a Game Console or Camcorder; Displaying an Image from the Game Console or Camcorder

Using with other equipment
11
52
En
Connecting a VCR
Use the INPUT 3 terminals when connecting a VCR and other
audiovisual equipment.
Use either an S-Video or standard video cable for the video signal.
Use a stereo audio cable for the audio. (If you’re using the standard
video input, you can use a red/white/yellow audio/video cable.)
VCR playback
To watch a VCR image, press INPUT 3 on the remote control unit
or press INPUT on the plasma display to select INPUT 3.
Note
• Signal priority for the INPUT 3 terminals is (1) S-Video, (2)
Video.
• Connect only the type of video cable that will actually be used.
• Refer to your VCR operation manual for the signal types
available.
Connecting a game console or camcorder
Use the INPUT 5 terminals to connect a game console, camcorder
and other audiovisual equipment.
Use either an S-Video or standard video cable for the video signal.
Use a stereo audio cable for the audio. (If you’re using the standard
video input, you can use a red/white/yellow audio/video cable.)
Displaying an image from the game console or
camcorder
To watch an image coming from the game console or camcorder,
press INPUT 5 on the remote control unit or press INPUT on the
plasma display to select INPUT 5.
Note
• Signal priority for the INPUT 5 terminals is (1) S-Video, (2)
Video.
• Connect only the type of video cable that will actually be used.
S-Video cable
PDP-427XDA (rear)
Audio/Video
cable
VCR
Game console/camcorder
Audio/Video cable
S-Video cable