Pioneer PDP-507XDA - Connecting a Personal Computer; Displaying an Image from a Personal Computer; Connecting an Amplifier;Av Receiver

Using with other equipment
11
53
En
Connecting a personal computer
Use the PC terminals to connect a personal computer.
• The PC input terminal is DDC1/2B-compatible.
Displaying an image from a personal computer
To watch an image coming from the personal computer, press PC
on the remote control unit or use the INPUT button on the plasma
display to select PC.
When connecting to a personal computer, the correct input signal
type is automatically detected. If the personal computer image
does not come in clearly, you may need to use Auto Setup menu.
See page 46.
Note
• The PC terminals cannot be used for audiovisual equipment.
Connecting an amplifier/AV receiver
You can enjoy more powerful sound by connecting an amplifier/
AV receiver and subwoofer to the plasma display.
Note
• For details, refer to the operation manual for the audio
equipment to be connected.
• If your amplifier/AV receiver has subwoofer output, it is not
necessary to connect the subwoofer output on the plasma
display.
• Audio signals corresponding to the currently displayed images
are always output to the MONITOR OUT and SUBWOOFER
terminals.
• Audio from a connected subwoofer is muted when you have
selected “Sub” for “Headphone Output” (page 35) and
connected headphones.
• No audio signals are output to the DIGITAL OUT terminal when
connected only to the HDMI terminal for INPUT 3 or INPUT 4.
Resolution Frequency
720 x 400 70 Hz
640 x 480 60 Hz
72 Hz
75 Hz
800 x 600 56 Hz
60 Hz
72 Hz
75 Hz
1024 x 768 60 Hz
70 Hz
75 Hz
1360 x 768
60 Hz
3
4
PDP-427XDA (rear)
Stereo
mini jack cable
RGB cable
PC
3
4
PDP-427XDA (rear)
Audio cable
Stereo audio
cable
Optical digital
cable
Amplifier/
AV receiver
Subwoofer