Pioneer PDP-507XDA - Page 55

Using with other equipment
11
55
En
For INPUT 4, connect just an HDMI cable - this carries both the
audio and video signals.
Activating the INPUT 3 HDMI terminal
1 Press HOME MENU.
2 Select “Option“ (/ then ENTER).
3 Select “HDMI Input“ (/ then ENTER).
4 Select “Setting“ (/ then ENTER).
5 Select “Enable“ (/ then ENTER).
6 Press HOME MENU to exit the menu.
Note
• You need not activate the INPUT 4 HDMI terminal.
To specify the type of digital video signals:
1 Repeat steps 1 to 3 provided for “Activating the INPUT 3
HDMI terminal“.
2 Select “Video“ (/ then ENTER).
3 Select the type of digital video signals (/ then ENTER).
• If you select “Auto”, an attempt will be made to identify the
type of digital video signals when digital video signals are
received.
4 Press HOME MENU to exit the menu.
Note
• If you select a parameter other than “Auto”, make such a
setting that results in natural colour.
• If no image appears or images appear in inappropriate colours,
specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
When using the INPUT 3 HDMI terminal, you need to specify the
type of audio signals.
1 Repeat steps 1 to 3 provided for “Activating the INPUT 3
HDMI terminal“.
2 Select “Audio“ (/ then ENTER).
3 Select the type of audio signals (/ then ENTER).
• If you select “Auto”, an attempt will be made to identify the
type of audio signals when audio signals are received.
4 Press HOME MENU to exit the menu.
Note
•The INPUT 4 HDMI terminal accepts only digital audio signals.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the operation
manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analogue audio cables.
Item Description
Disable (default) Deactivates the INPUT 3 HDMI terminal.
Enable Activates the INPUT 3 HDMI terminal.
3
4
HDMI device
HDMI cable carrying
the HDMI mark
PDP-427XDA (rear)
Item Description
Auto (default) Automatically identifies input digital video signals.
Colour-1 Digital Component Video signals (4:2:2) locked
Colour-2 Digital Component Video signals (4:4:4) locked
Colour-3 Digital RGB signals locked
Item Description
Auto (default) Automatically identifies the input signals.
Digital Accepts digital audio signals.
Analogue Accepts analogue audio signals.