SV61311 Rev. E
3-33
Basic Operation • 3
Sheet Options
Menu Item Associated Options and Actions
Name Use the alphanumeric matrix to enter the job name.
Control Document
is the top sheet in
the Mail Piece Icon
Tree. This field is
read-only.
Read-Only field
• Yes, or
• No
Type identifies the
printing source of the
job.
• Printed Separately - indicates the sheet is not printed by the
Attached Printer.
• Printed by Attached Printer - indicates the sheet is printed by
the Attached Printer.
NOTE: This menu option is available only with configurations that
contain an Attached Printer. If an Attached Printer is not present,
this option appears as a read-only field with “Printed Separately” as
the default setting.
Personalized refers
to the top sheet that
contains the address
that will show in the
windowed envelope
and/or a sheet that
contains information
customized to a
specific recipient.
• Top Address
• Middle Address
• Bottom Address
• Not Personalized
• Personalized - No Address
Quantity is the
number of this type
of sheet to include in
each mail piece.
• 1, 2, 3, 4, 5, 6
• Custom Quantity
- Use UP/DOWN arrows to select number.
- Select "Accept" when done.
NOTE: Quantity is always set to Variable (n) for scanning jobs.
Page Order
identifies the feeding
pattern of multiple
sheets that are not
identical.
Forward - indicates page 1 is on top and pages 2, 3, 4, etc. follow in
that order.
Reverse - indicates that the last page, for example, page 4, is first
followed by pages 3, then 2, then 1.
NOTE: This menu option appears as a read-only field when the
job requires a Custom Feeder. The feeding pattern is set by the
Custom Feeder.
Length is the
dimension of the
sheet in the direction
of the feed.
• Auto measure - measures the recommended length
automatically.
NOTE: This menu option appears as a read-only field when
the job requires a Custom Feeder.
• Custom Length - allows increase or decrease of sheet length.
- Use UP/DOWN arrows to select number.
- Select "Accept" when done.
• Letter - 279mm, Legal - 356mm, and A4 - 279mm are
additional options.
NOTE: The “Legal” option is not available when the sheet
is printed by the Attached Printer. Additionally, legal-sized
documents cannot be fed from the High Capacity Sheet
Feeder. The system will assign these documents to a Tower
Feeder, even when the High Capacity Sheet Feeder is
available.
To Next Page
Loading...
