J693 19
From Ready Mode, press the key to enter the Menu Mode. Depending
upon the configuration of the printer, the following is a list of the possible Enter
and Exit Prompts.
MENU MODE
Enter/Exit Prompt Description:
ENTER PASSWORD
0 0 0 0
You are attempting to enter the Menu Mode.
Security has been enabled and now the
correct user-definable password is required
for access the Menu Mode functions.
KEEP HOST CHANGES?
ENTER = YES
You are now entering the Menu Mode. Host
commands have affected the configuration
of the printer. Pressing ENTER will save
these changes; otherwise, the printer will
revert to previously saved settings.
SAVE CHANGES?
ENTER = YES
You are now exiting the Menu Mode, but
have made changes to the printer’s settings.
Pressing ENTER will reconfigure your
printer according to these changes;
otherwise, the printer will revert to
previously saved settings.
;
;
Note:
While in the Menu Mode, the printer will stop processing new DPL
(or bitmapped) data.
To Next Page
Loading...