J693 75
7.0 Printer Specifications
Bar Codes
(See the Programmer’s Manual for details. See Appendix B for visual samples.)
Code 39, Interleaved 2 of 5, Code 128 (subsets A, B and C), Codabar,
LOGMARS, UPC-A, UPC-E, UPC 2 & 5 digit addendums, EAN-8, EAN-13,
EAN 2 & 5 digit addendums, UPC Random Weight, Code 93, Plessey,
Universal Shipping Container Symbology, Code 128 MOD 43, Postnet,
USS/EAN-128 Random Weight, Telepen, UPS MaxiCode (modes 2 & 3),
PDF417, Data Matrix and QR Code.
Fonts
9 Bit-Mapped Fonts, rotatable 0, 90, 180, 270 degrees
CG Triumvirate Scalable Font
CG Triumvirate Condensed Bold Scalable Font
Communications
Interfaces: EIA RS-232/DB-25 Serial, and IEEE 1284
Compliant Parallel
Serial Data Rates: 2400, 4800, 9600, 19.2K, and 38.4K baud.
Handshaking: Xon/Xoff; CTS/DTR
Parity: Even, Odd, or None
Stop Bits: 1 or 2
Data Bits: 7 or 8
Electrical
Input Voltage: 90 – 132 or 180 – 264 VAC @ 47–63 Hz, auto-
ranging.
Power Consumption: Typical Operating: 90 Watts / Standby: 10 Watts
Grounding: Unit must be connected to a properly grounded
receptacle.
To Next Page
Loading...