SendPro Tablet Operator’s Guide
28
SendPro Tablet Operator’s Guide
• File Not Found - This message is shown when the device is not connected to Internet or File is corrupted or
storage permission is denied.
• Unable to download file - This message is shown when the device is not connected to Internet.
• Device you are trying to connect is not supported - This message is shown when other than Brother QL-
1110NWB printer is selected for printing the label.
• Please check network connection and retry - This message is shown when the device is not connected
to Internet.
• Printer seems to be offline - This message is shown when the printer goes offline or the power supply is
off.
• Failed to connect to the printer - This message is shown when the print command is given and the device
is taken outside of range or some socket error occurred.
Other Error Codes:
ERROR_COMMUNICATION_ERROR
Error: Failed to retrieve printer status
ERROR_HIGH_VOLTAGE_ADAPTER
Error: High-voltage adaptor
Error: Cassette-change during printing
ERROR_FEED_OR_CASSETTE_EMPTY
Error: Feed error or paper empty
ERROR_WRONG_CASSETTE_DIRECT
Error: Wrong paper-cassette direction
ERROR_CREATE_SOCKET_FAILED
Error: Failed to create socket
ERROR_CONNECT_SOCKET_FAILED
ERROR_GET_OUTPUT_STREAM_FAILED
Error: Failed to retrieve output stream
ERROR_GET_INPUT_STREAM_FAILED
Error: Failed to retrieve input stream
ERROR_CLOSE_SOCKET_FAILED
Error: Failed to close socket
Error: Insufficient memory
Error: Non supported file
Error: Expired trial period for PDF printing
Error: Wrong information in
custom paper setting file
Error: Not set IP and MAC address
Error: IP and Mac address is not match
for selected printer
ERROR_TEMPLATE_FILE_NOT_MATCH_MODEL
Error: Template file is not a match
for selected printer
ERROR_TEMPLATE_NOT_TRANS_MODEL
Error: Selected printer model do not
support Template transmission
Error: The cover is open (RJ/TD/PT-
E550W)
Error: Wrong roll or wrong label
Error: Unsupported interface
Error: No file specified by the template key
exists
Error: Printing is cancelled
ERROR_TEMPLATE_NOT_PRINT_MODEL
Error: Selected printer model do not
support Template print
(
)
ERROR_PRINTER_SETTING_NOT_SUPPORTED
Error: Device setting is not supported on
the selected printer.
Error: Invalid parameter is set