Set Components
This section documents all the parts included in the kit, including images, quantities, and part numbers. The part number
of each part will match the part number noted on the label of each part bag. The part bags may contain one or more parts,
and there may be more than one bag of a particular type of part. Instructions for purchasing additional parts are found at
the end of this section.
The beams are named by the number of small holes on one side of the beam. Do not select beams by counting the larger
holes.
2x – 15-Hole Beam 40207
2x – 13-Hole Beam 40206
4x – 8-Hole Beam 40205
4x – 7-Hole Beam 40204
4x – 6-Hole Beam 40203
4x – 5-Hole Beam 40202
4x – 4-Hole Beam 40201
1:1 scale
To identify TETRIX PRIME beams, count the small holes. The
example above is a 4-Hole Beam.
1 2 3 4
Set Components 3
Back to Contents page
To Next Page
Loading...