Piusi CUBE B.SMART - DISPENSING VIA USER KEY (I-BUTTON)

43/124
EN
43 /6 0
This manual belongs to PIUSI S.p.A. The reproduction of all or parts is prohibited.
CUBE
EN (translated from Italian)
19.3 DISPENSING VIA USER KEY (I-BUTTON)
When the manager creates the driver he can add an electronic key
(iButton) which is used to perform the access.
To do this, just add the last 7 digits of the hexadecimal code associated
with the key to the input of the driver’s card in WebAPP (see WebApp
manual, chapter “ADD NEW DRIVER”).
The i-Button serves as a means of authentication to replace the smartphone.
For the dispensing, simply place the iButton on the reader in the controller:
authentication takes place, then you can start dispensing.
Dispensings are uploaded to the cloud as soon as a smartphone with an
active data connection connects to the controller.
• NOT FOR RESALE • NICHT EICHFÄHIG • PARA UTILISACION EXCLUSIVA DEL USUARIO •
INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO
NON IDONEO ALLA MISURAZIONE DI PRODOTTI PER LA VENDITA AL PUBBLICO • NE È
VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •
MADE in ITALY