Installation, use and maintenance
M0546
14 /6 0
9.3 DISPENSING NOZZLE
The dispensing nozzle supplied with CUBE B.SMART is an automatic type, with a stop device when
the tank is full.
9.4 LEVEL INDICATOR
The level indicators to which the dispenser can be connected are only clean contacts, which are
configured by WebApp.
9.5 DISPLAY COVER
To ensure adequate
protection for the
panel, a damper
display cover has
been designed which
can be lowered if
necessary.
It is advisable, in
very strong sunlight
conditions, to keep
the display cover
always lowered.
9.6 DISPENSING MANAGEMENT SYSTEM
FOREWORD B.SMART is an electronic system for controlling the dispensing of fluids via
smartphone.
The control system consists of:
An electronic controller
equipped with a BlueTooth interface (BLE 4.0 and later), a display and an
interface LED that controls a dispensing pump
An APP
installed on a smartphone equipped with an Android operating system or
Apple IoS
A WebAPP
namely an internet portal accessible from any PC or Tablet connected to the
internet from which the entire site can be monitored
SYSTEM FUNCTIONS • site configuration, acquisition and management of refillings,
management of refilling fuel dispensers, management of drivers,
vehicles and detailed reporting of the dispensings via WebAPP
accessible from any PC/Tablet, using your credentials
• Fuel dispensing using the dedicated APP: PIUSI APP, downloadable
only for smartphones from Play Store and App Store, which connects to
the fuel dispenser / controller via BLE connection
• Fuel dispensing using the dedicated APP also in areas without 3/4G
coverage and Wi-Fi
• Dispensing via iButton associated with the individual driver
• Possibility to remotely manage sites far from the company headquarters
COMPATIBILITY
WITH OPERATING
SYSTEMS
The system is compatible with the following iOS versions:
• iOS10
• iOS11
• iOS12 and subsequent
To Next Page
Loading...
