Installation, use and maintenance
M0546
8 /6 0
7 TRANSPORT, HANDLING AND UNPACKING
CUBE B.SMART is shipped in a cardboard packaging that can be stacked.
During storage follow the directions shown on the packaging with graphic
patterns about the handling side. If the machine is lifted, check if the
capacity of the lifting means and of the accessories (such as the bands) is
correct. The use of mechanical means for handling and lifting must be solely
entrusted to authorised and suitably trained staff.
During machine inactivity, both packed or unpacked, it should be stored
in an area protected against weather agents (rain, moisture, sun, etc...)
and dust.
To open the cardboard packaging, use scissors or a cutter, taking care not
to damage the system.
With the help of a second operator, fully open the packaging and grasp the
CUBE B.SMART putting it vertical, so that it can be positioned afterwards.
Once removed from the packaging, the station should always be
kept vertical. The packaging elements (cardboard, wood, cellophane,
polystyrene, etc...) must be placed in the suitable containers and not left
in the environment or within children easy reach as they are potentially
harmful. Disposal should be performed in compliance with the standards
in force in the utilisation country.
The packaging shall bear the following indications:
- arrow indicating the UPPER side;
- label showing the information for the equipment (model, weight, etc.).
To Next Page
Loading...
