User manual - ATR144- 43
• It is useful to enable the system sounds on the smartphone,
as the notification sound confirms that the device has
correctly been detected.
The App interface is provided with four tabs: SCAN, DATA,
WRITE, EXTRA.
Select the first tab “SCAN” to read data stored into the internal
memory of the device; place the smartphone in contact with
the controller frontal panel, making sure that the phone’s
antenna matched with that of the controller.
Once detected the device, the App emits a notification
sounds and proceeds with the model identification and the
reading of the parameters.
The graphic interface shows the advancement and switches
to the second tab “DATA”. It is now possible to move the
smartphone away from the controller to make the required
modifications more easily.
The device parameters are divided into collapsible groups
and are displayed with name, current value and reference
index to the manual.
Click on a row to open the setting screen of the related
parameter with the detailed view of available options (in case
of multiple choice parameters) or of the minimum/maximum/
decimals limits (for numeric parameters), included the text
description (as per section n. 15 of the user manual). Once
selected the chosen value, the related row will be updated
and underlined into the tab “DATA” (hold down the line to
cancel modifications).
To download the new configuration on your device, select the
third tab “WRITE”, place again the smartphone in contact with
the controller and wait for the notification.
The ATR144 will show a restart request, necessary to update
the configuration with the new written modifications; if it
does not restart, the ATR144 will continue to work with the
previous configuration.
To Next Page
Loading...
