Pixsys ATR144 - Loading default values; Parameters list functioning

User manual - ATR144- 45
11.1 Loading default values
This procedure allows to restore factory settings of the device.
Press Display Do
1
FNC
for 3 sec
Display 1 shows PASS,,
while display 2 shows
0000 with the 1st digit
flashing.
2

or 
Modify the flashing digit
and move to the next
one pressing SET.
Enter password
9999.
3
FNC
to confirm
The device loads default
settings and restarts.
11.2 Parameters list functioning
The controller ATR144 integrates many features that make
the configuration parameters list very long. To make it more
functional, the parameters list is dynamics and it changes as
the user enables / disables the functions. Practically, using a
specific function that occupies a given input (or output), the
parameters referred to other functions of that resource are
hidden to the user making the parameters list more concise.
To simplify the reading/interpretation of the parameters,
pressing SET it is possible to visualize a brief description of
the selected parameter.
Finally, keeping pressed FNC, it is possible to move from the
mnemonic visualization of the parameter to the numeric one,
and vice versa. Ex. The first parameter can be displayed as S E n .1
(mnemonic visualization) or as P. 0 01 (numeric visualization)