Pixsys ATR144 - Access configuration

44 - ATR144 - User manual
In addition to the classic operation of parameters reading-
>modification->writing, MyPixsys is provided with additional
functions which can be accessed by the tab “EXTRA”, as save
parameters / share loaded values/ restore default values.
11 Access configuration
Press Display Do
1
FNC
for 3 sec.
Display 1 shows PASS,,
while display 2 shows
0000 with the
1st digit flashing.
2


Modify fl ashing digit and
move to next digit with
SET.
Enter
password1234.
3
FNC to
confirm
Display 1 shows the
first parameters group,
display 2 shows the
description.
4

or 
Scroll parameters groups.
5
SET
to confirm
Display 1 shows the first
parameter of the group
and display 2 shows its
value.
Press FNC to exit
configuration.
6

or 
Scroll parameters.
7
SET
to confirm
Allows parameter
modification (display 2
flashes)
8

o 
Increases or decreases
visualized value
Introduce new
data
9
SET
Confirms and stores the
new value.
10
FNC
Backs to parameter
groups selection (see
point 3).
Press again
FNC to exit
configuration