Pixsys ATR144 - GROUP E - AL. 2 - Alarm 2

60 - ATR144 - User manual
71 A.1.S. p. Alarm 1 Setpoint Protection
Controls access to the alarm 1 setpoint
FrEE Editable by the user (Default)
Lock Protected
Hid E Protected and hidden
72 A.1.Lb. Alarm 1 Label
Selects the message displayed in case of alarm 1
intervention.
dis a b. Disabled. Default 0.
lb. 01 Message 1 (see table on paragraph .)
..
lb. 16 Message 16 (see table on paragraph .)
u s e r.l. Custom message (modifiable by the
user through the app or via modbus)
73÷77 Reserved Parameters - Group D
Reserved parameters - Group D.
12.e GROUP E -
AL. 2
- Alarm 2
78 AL.2. f. Alarm 2 Function
Alarm 2 selection.
diS a b. Disabled (Default)
A b . u p. A . Absolute Upper Activation. Absolute
referred to the process, active over
Ab.Lo.a. Absolute Lower Activation. Absolute
referred to the process, active under
bAnd Band alarm (command setpoint
± alarm setpoint)
a.b A n d Asymmetric band alarm (command
setpoint + alarm setpoint 2 H and
command setpoint - alarm setpoint 2 L).
u p. d e v. Upper Deviation alarm
L o . d e v. Lower Deviation alarm
Ab.c.u.A. Absolute Command Upper Activation.
Absolute alarm referred to the
command setpoint, active over