Pixsys DRR244 - Page 46

46 - DRR244 - User manual
GROUP R -
disp.
- Display and interface
277 v .FLt Visualization Filter
dis a b. Disabled
ptcHf Pitchfork filter (Default)
fi. o r d. First Order
fi. o r. p. First Order with Pitchfork
2 sa.m. 2 Samples Mean
.... ...n Samples Mean
10.sa.m. 10 Samples Mean
278
vi.d.2 Visualization Display 2
Selects visualization on display 2.
c.1.S P v Command 1 setpoint (Default)
o u. P e.1 Percentage of command output 1
AMPer. Ampere from current transformer
279
tMo.d. Timeout Display
Determines the display timeout
diS a b. Disabled. Display always ON
(Default)
1S S 15 seconds
1 Min 1 minute
5 Min 5 minutes
10 Min 10 minutes
3 0 Min 30 minutes
1 h 1 hour
280
tMo.S. Timeout Selection
Selects which display is switched off when Display Timout expires
d is p. 1 Display 1
d is p. 2 Display 2 (Default)
d s p. 1. 2 Display 1 and 2
d.1.2.Ld. Display 1, 2 and led
281
u .M.P. c. User Menu Pre-Programmed Cycle
Allows to modify rising/falling gradient and rentention time form the user menu, in pre-pro-
grammed cycle functioning. To access parameter modification, press SET.
dis a b. Disabled (Default)
ris.G r. Only rising gradient
m a. ti. Only retention time
ri. G . m.t. Rising gradient and retention time
faL.Gr Only falling gradient
ri.Fa.G. Rising and falling gradient
fa.G.m.t. Falling gradient and retention time
r. f. G . m . t . Rising gradient, retention time and falling gradient
282
v.out Voltage Output
Selects the voltage on the sensors power terminals and of the digital outputs (SSR).
12 v 12 volt (Default)
24 v 24 volt
283
S cL. t. Scrolling Time
Select the duration for the visualization of the user menu data, before returning to the default
page.
3 s 3 seconds
s s 5 seconds (Default)
10 s 10 seconds
30 s 30 seconds
1 MiN 1 minutes
5 MiN 5 minutes
10 MiN 10 minutes
M A n.S c. Manual scroll
284
d . SP. F. Display Special Functions