33
EN Instruction, use and maintenance manual
1. PREMISE
Dear Customer, first of all we would like to thank you for choosing our product and congratulate you on your choice. To allow
you to make the most of your new oven, please follow the instructions in this manual carefully. The ovens referred to in this
manual have been exclusively designed to cook pizzas and similar products. The above-mentioned intended use and the
configurations envisaged for these appliances are the only ones allowed by the Manufacturer: do not use the appliance in a
manner that is inconsistent with the instructions provided. The installation must be carried out exclusively by qualified
personnel, able to guarantee the best operating and safety conditions.
2. SYMBOLS
Points of considerable importance are highlighted by the following symbols in this manual:
3. SAFETY WARNINGS
Warnings for the installer
Verify that the electrical connections for the oven comply with local, national and European regulations.
• Comply with the instructions provided in this Manual.
• Do not make haphazard electrical connections with temporary or uninsulated cables.
• Check that the earthing connection to the electrical mains is efficient.
• Always use individual safety devices and other means of protection required by the law.
Warnings for the user
The environmental conditions of the location where the oven is installed must have the following characteristics:
• Be dry;
• Be at a safe distance from water and heat sources;
• Have adequate ventilation and lighting that comply with the hygiene and safety standards required by current laws;
• The floor must be flat and compact to facilitate thorough cleaning;
• No obstacles of any kind should be placed in the immediate vicinity of the oven as these could interfere with its normal
ventilation.
• Make sure that children do not approach the oven when it is in use;
• Comply with the instructions provided in this Manual;
• Do not remove or tamper with the oven safety devices;
• Always pay utmost attention, i.e., the user must pay attention to what he/she is doing and not use the oven when
distracted;
• Comply with the instructions and warnings on the oven nameplates.
The nameplates are safety devices and therefore, must always be perfectly legible. If they become damaged or illegible,
they must be replaced by requesting an original replacement from the Manufacturer.
• Disconnect the power supply at the end of each use and before cleaning and maintenance operations.
Warnings for the maintenance technician
Comply with the instructions provided in this Manual:
• Always use individual safety devices and other suitable means of protection.
To Next Page
Loading...