RS232 Codes
Planar RPS and Video Controller RS232 User Guide Page | 25
020-1332-00I
1
Updated
VC.LIST Video Controller
ID List
1603 ? Integer 1-VC.COUNT
…..and/or….
Integer 1-VC.COUNT
String VC.LIST?
VC.LIST:1 2 3 4
VC.LIST(3)?
VC.LIST:3
VC.LIST(2 4)
VC.LIST:2 3 4
Returns a list of up to 64 video controller
IDs that are currently recognized by the
system. The optional modifiers enable
listing when there are more than 64 video
controllers. The first modifier gives the 1-
based index into the list for the first
returned value. If the second modifier is
omitted, only one value is returned. When
given, the second value specifies the end
index of the returned values.
No 4.0 Ye s No
VC.START.
ADDRESS
VC Starting IP
Address
2327 =? XXX.XXX.XXX.XXX/XX VC.START.ADDRESS=192.168.0.120/24
VC.START.ADDRESS:"192.168.0.120/24"
Gets / sets the first VC's xxxx IP address and
subnet. All additional VCs will be assigned
an IP address in numeric order from this
assigned address.
No 8.0 Yes Yes
WALL.
BRIGHTNESS
Wall Brightness
Setting
1436 =?+- 0-100 WALL.BRIGHTNESS?
WALL.BRIGHTNESS:80.000000
Gets / sets the global wall brightness. No 7.0 Ye s No
WALL.HEIGHT Wall Pixel Height 613 =? Integer WALL.HEIGHT=3840
WALL.HEIGHT:3840
Gets / sets the wall height pixels. No 8.0 Yes Yes
WALL.WIDTH Wall Pixel Width 612 =? Integer WALL.WIDTH=2160
WALL.WIDTH:2160
Gets / sets the wall width pixels. No 8.0 Ye s Yes
Command Description
Numeric Command Code
Operators
Modifiers Operands Example Notes
Standalone Component Command
Firmware Version Active
Functional in Fast Start Standby
Functional in Low Power Standby
To Next Page
Loading...
