EasyManua.ls Logo

PLANET ECLIPSE GTEK170R - OLED Parameters

PLANET ECLIPSE GTEK170R
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
GTEK170R
ELECTRONICS
OLED PARAMETERS
PRESET
Modes may vary depending on global location and 170R model.
1 SEMI ∞
Uncapped Semi-Automatic: one shot per trigger pull (no rate of re cap).
2 SEMI 15.0
Capped Semi-Automatic: one shot per trigger pull (15.0bps cap).
3. NXL 10.2
Capped Ramping: NXL compliant (10.2bps cap).
4. PSP 10.2
Capped Ramping: PSP compliant (10.2bps cap).
BS ON ROF
This controls how fast the 170R can re with the
breech sensor on. Capped modes only.
Available range: 4.0 - 15.0 bps
Default setting: 15.0 bps
BS OFF ROF
This controls how fast the 170R can re with
the breech sensor o. This should be set to the
slowest speed of the loader.
Available range: 4.0 - 15.0 bps
Default setting: 10.0 bps
The rate of re cap is deliberately set lower than the league rules allow
in order to compensate for any tolerances in the rate of re measuring
devices.

Related product manuals