7
Fiber Port Redundancy
Link status auto-detect and redundant on dual ports with the same
connector type
Only when primary port is active, the backup port is blocked.
When primary port link fails, the trafc will swap to backup port
automatically.
Once the primary port status is back to link up, the trafc swaps
from backup port to primary port.
1.4 ProductSpecications
Model IGS-620TF
Hardware Specications
10/100/1000BASE-T
Ports
4
SFP Interfaces
2 1000BASE-SX/LX/BX SFP interfaces
(Port-5 and Port-6)
Compatible with 100BASE-FX SFP
Dimensions
(W x D x H)
135 x 87 x 32mm
Weight 503g
Power Requirements
DC 12~48V, Redundant power with polarity
reverses protection function. AC 24V Power
Adapter
Power Consumption
/ Dissipation
7.2 watts/24BTU
Installation DIN rail kit and wall mount ear
Switch Specications
Switch Processing
Scheme
Store-and-Forward
MAC Address Table 1K entries
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Switch Fabric 12Gbps
To Next Page
Loading...
Need help?
General
