EasyManuals Logo
Home>Planet>Network Router>IGS-801T

Planet IGS-801T User Manual

Planet IGS-801T
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
Step 3: To hang the Industrial Gigabit Ethernet Switch on the DIN-
Rail track or wall, please refer to the Mounting Installation
section.
Step 4: P
ower on the Industrial Gigabit Ethernet Switch. (Please refer
to the Wiring the Power Inputs section for power input) The
power LED on the Industrial Gigabit Ethernet Switch will light
up. Please refer to the LED Indicators section for meaning of
LED lights.
Step 5: P
repare the twisted-pair, straight through Category 5 cable
for Ethernet connection.
Step 6: I
nsert one side of Category 5 cables into the Industrial Gigabit
Ethernet Switch Ethernet port (RJ-45 port) and another side
of category 5 cables to the network devices’ Ethernet port
(RJ-45 port), ex: switch, Pc or Server. The UTP port (RJ-45)
LED on the Industrial Gigabit Ethernet Switch will light up
when the cable connected with the network device. Please
refer to the LED Indicators section for LED light meaning.
Note
Be sure the connected network devices support MDI/
MDI-X. If it does not support then use the crossover
category 5 Cable.
Step 7: W
hen all connections are all set and LED lights all show in
normal, the installation is complete.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet IGS-801T and is the answer not in the manual?

Planet IGS-801T Specifications

General IconGeneral
Switch typeUnmanaged
Switch layerL2
Quality of Service (QoS) supportYes
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
Stackable-
CertificationFCC, CE
Product colorBlue
Rack mountingNo
Housing materialMetal
International Protection (IP) codeIP30
Power consumption (typical)6.72 W
Heat dissipation23 BTU/h
Operating temperature (T-T)-40 - 75 °C
Operating relative humidity (H-H)5 - 95 %
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Cable types supportedCat3, Cat4, Cat5, Cat5e, Cat6
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
Throughput11.9 Mpps
Jumbo frames9000
MAC address table4000 entries
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth87 mm
Width32 mm
Height135 mm
Weight476 g

Related product manuals